Halo Tundra + Hope Fatsno | good value fatbike wheels

This great value fatbike wheelset consists of Halo Tundra rims and Hope Fatsno or DT Swiss Big Ride hubs from £559.00 a pair hand built by Strada with UK shipping included.

Description

Strada have put together these fat bike wheels using Hope Fatsno hubs, Halo Tundra 80mm wide rims and Alpina spokes and alloy nipples for a competitive price of £559.00 with UK shipping via FedEx.

Rims: The Halo Tundra is 80mm wide welded seam single wall rim, black powder coat finish with cut outs.  When used with a Surly fat tyre run at low pressure, the Tundra produces a big footprint that provides amazing traction and flotation.  Single wall construction and cut outs keep the weight respectable (870 g).

Hubs: The Hope Fatsno is a good choice for your fatbike. This variant of the Hope EVO II runs stainless steel bearings throughout and means longer life, smoother, free running and good value for money. This hub features a one piece 7075 aluminium rotor body and a revised 4 pawl carrier. Four offset pawls engage into a 40 tooth steel ratchet which is fixed into the hub shell and is sealed with a frictionless, non contact labyrinth seal. The 17mm axle runs on five cartridge bearings. All EVO II hubs are standard 6 bolt disc compatible. The hub shell is machined from a solid billet of 2014 T6 aluminium and available in Alloy, Gold. Green, Black, Blue and Red.

Spokes + Nipples: We use Sapim Race + silver plated brass nipples with an anti slip insert. Black spokes on request.

Singlespeed adapter kit – we can supply a cog and spacers for running single speed on your bike.

EU shipping – we can ship these to EU destinations via Parcelforce but the bulky size of the box does mean an additional shipping fee (at cost).

Ready for building, Fat Bike wheels of your specification – contact us on 01903 214956 or use the contact form to place an order.

Wide and light, the new Halo Tundra rim will spread the load. Fat bike specific 80mm wide rim with weight saving holes and double spoke holes.

SPEC:
80mm width
Pin joint, single wall.
Disc use only.
32H – double spoke hole drilled.
CNC oblong weight saving cut-outs.
26″ Black powder coat, Presta Valve.
ERD: 540mm
Weight: 870g

(Not supplied with Rim Strip)

Recommended Spoke Tension: Front and Rear: 100 to 135Kgs.

Spoke Offset is 11.75mm +- 0.5mm from the centre line.

You may also like…