Here is an E-Bike wheel rebuild we recently undertook for Rob from Surrey. He had purchased this wheel from a well known online auction site and fitted it to his bike to get around town. Unfortunately it had not been built properly and soon developed a nasty wobble. He sent it down to us and we took a look. The rim fitted was only a single wall (shaped like a V) instead of a stronger A shape walled rim really required. Also the spoke holes in the rim flanges were excessively large allowing the spokes to rattle around. These two factors made the wheel unusable with the large amount of torque being applied through it. We cut the hub out and started again with a sturdy wide Velocity Chukker rim and Sapim Race spokes on which we use small washers on the J-bends to ensure a snug fit to the hub flange. We radially laced the wheel and shipped it back to Rob. If you have an E-Bike wheel in need of attention then get in touch on 01903 750040 or use the contact form.